GENE-CV05, 3.5" SubCompact Board With Intel® Atom™D2550/N2800/N2600 Processor



    At 146mm x 101.6mm, the GENE-CV05 is a fanless 3.5" embedded board with widely acclaimed Intel Atom D2550/N2800/N2600 processor and Intel NM10 chipset for space constrained applications. Coming in at around 10 watts of power using the N2000 series, GENE-CV05 is an eco-friendly embedded board for conscientious businesses. When equipped with the D2550/N2800 processors, the GENE-CV05 SBC supports up to 4GB in a DDR3 SODIMM, while the N2600 processor can support a DDR3 SODIMM with a maximum of 2 GB of memory. The GENE-CV05 single board computer has a CFast™ interface and one SATA 2.0 port for operating system and Storage, along with two Gigabit LAN ports for efficient network connectivity. Multiple I/O ports, including six COM ports, six USB2.0 ports, 8-bit Digital I/O, and one PCI Express Mini Card with a SIM slot enables the GENE-CV05 to satisfy the needs of a wide variety of markets and applications.

    AAEON's GENE-CV05 SBC has dual LVDS interfaces and DVI that can work simultaneously with one of the LVDS interfaces for graphics support, along with added display capabilities for full HD application. As the first generation of Atom processors to have integrated HDMI/DVI for high graphics performance and HD decoder, the Intel Atom processor N2000 and D2000 series exhibit 4x the graphics performance compared to the previous generation. Combine this with the onboard Resistive Touch screen interface, and the GENE-CV05 is the ideal solution for Digital Signage, Gaming, Industrial Automation and Medical vertical markets.


    • Industrial Automation
    • Transportation
    • Test & Measurement
    • Digital Signage


    • Intel® Atom™ D2550/ N2800/N2600 Processor
    • Intel® NM10
    • DDR3 800/1066 SODIMM, Max. 4 GB for Intel® Atom™ D2550/N2800 and Max. 2 GB For Intel® Atom™ N2600
    • Gigabit Ethernet x 2, RJ-45 x 2
    • CRT, DVI, 18/24-bit Single Channel LVDS LCD + 18/24-bit Dual-Channel LVDS LCD For Intel® Atom™ D2550; CRT, DVI, 18-bit Single Channel LVDS LCD + 18/24-bit Dual-Channel LVDS LCD For Intel® Atom™ N2800/N2600
    • 2CH HD Audio + 2W Amplifier
    • SATA 3.0Gb/s x 1, CFast™ x 1
    • USB2.0 x 6, COM x 6, 8-Bit Digital I/O, Parallel x 1 (Optional)
    • Onboard 4/5/8-wire Resistive Touch Screen Controller
    • Mini Card x 1
    • +12V Only Operation
    • Onboard Trusted Platform Module (Optional)
    • mSATA x 1 (Optional, Would Replace Mini Card Interface)
    • AAEON Hi-Safe SDK/Utility Supported

    Specifications [GENE-CV05]

    Form Factor3.5'' SubCompact Board
    CPUIntel® Atom™ D2550/N2800/N2600
    CPU FrequencyUp to 1.86GHz
    ChipsetIntel® NM10
    Memory TypeDDR3 800/1066, SODIMM x 1
    Max. Memory Capacity4 GB
    BIOSSPI type
    Wake on LANYes
    Watchdog Timer255 Levels
    Power Requirement+12V
    Power Supply TypeAT/ ATX
    Power Consumption (Typical)Intel® Atom™ N2800, DDR3 1333 4 GB 1.00A@+12V
    Intel® Atom™ N2600, DDR3 1066 2 GB 0.87A@+12V
    Intel® Atom™ D2550, DDR3 1333 4 GB 1.24A@+12V
    Dimension (L x W)5.75" x 4" (146mm x 101.6mm)
    Operating Temperature32°F ~ 140°F (0°C ~ 60°C)
    Storage Temperature-40°F ~ 176°F (-40°C ~ 80°C)
    Operating Humidity0% ~ 90% relative humidity, non-condensing
    MTBF (hours)62000
    VGA/LCD ControllerIntel® Atom™ D2550/N2800/N2600 integrated
    Backlight inverter supplyUp to 24-bit Dual-Channel LVDS
    EthernetRealtek RTL 8111E x 2 ,10/100/1000Base-TX, RJ-45 x 2
    AudioHigh definition audio interface
    USB PortUSB2.0 x 6
    Serial PortRS-232 x 5 , RS-232/422/485 x 1
    Parallel PortSPP/EPP/ECP x 1 (Shared with COM6 by BOM)
    HDD InterfaceSATAII x 1
    FDD Interface
    SSDCFast™ (alternative with mSATA by BOM and also occupy one Mini-Card location)
    Expansion SlotMini-Card x 1
    DIO8 bit
    SIMx 1
    TPMx 1
    Touchx 1

    Ordering Information [GENE-CV05]

    Part NumberGENE-CV05-A11-0001GENE-CV05-A11-0002GENE-CV05-A11-0003
    cpu Intel® Atom™ N2800 Intel® Atom™ N2600 Intel® Atom™ N2600
    chipset NM10 NM10 NM10
    fan/ fanless Fanless Fanless Fanless
    display CRT + LVDS (1 or 2) CRT + DVI
    LVDS (1 or 2) + DVI LVDS 1 + LVDS 2
    CRT + LVDS (1 or 2) CRT + DVI
    LVDS (1 or 2) + DVI LVDS 1 + LVDS 2
    CRT + LVDS
    lvds 1st 18b,1CH
    2nd 24b, 2CH
    1st 18b,1CH
    2nd 24b, 2CH
    storage SATA x 1
    CFast x 1
    SATA x 1
    CFast x 1
    SATA x 1
    CFast x 1
    lan GbE x 2 GbE x 2 GbE x 2
    usb UBS2.0 x 6 UBS2.0 x 6 UBS2.0 x 6
    rs-232 5 5 3
    rs-232/422/485 1 1 1
    expansion slot Mini Card x1 Mini Card x1 Mini Card x1
    power +12V, AT/ ATX +12V, AT/ ATX +12V, AT/ ATX
    power temp 0°C ~ 60°C 0°C ~ 60°C 0°C ~ 60°C
    others Touch Controller, SIM, DIO x 8 Touch Controller, SIM, DIO x 8 SIM, DIO x 8

    Downloads [GENE-CV05]

    • Datasheet
    • BIOS
    • Driver
    • Manual
    • SDK

    Packing List

    • Product DVD
    • GENE-CV05

      - With Active Cooler (Intel® Atom™ D2550 Version)

      - With Heat Sink (Intel® Atom™ N2800/N2600 Version)

    Optional Accessories

    Part Number Description
    1700050207 USB Cable, Length 20cm
    1701090150 COM Port Cable, Length 15cm
    1709100254 Audio Cable, Length 25cm
    1709070500 SATA Cable, Length 50cm
    1701260200 Parallel Port Cable, Length 20cm
    170204010R Big Double Row 4-Pin Power Input Cable For +12V Input, Length 10cm
    1702150155 Power Cable for 2.5” SATA Hard Disk, Length 15cm
    170220020B Conversion Cable ATX Power Supply, Length 20cm
    1700060157 Keyboard/Mouse Cable
    205AGCV5A1 WES7 Japanese

    FAQ [GENE-CV05]

    How to make the mini PCIe function to mSATA ?

    The BIOS can detect the mSATA device after re-work SOP and don’t need to adjust anything in the BIOS menu.

    How to change Mini Card to mSATA on GENE-CV05?

    Please refer to the attached file as detail rework process

    How to change Mini Card to mSATA on GENE-CV05.pptx

    Cedar Trail - Intel Atom Processor N2000 & D2000 Series Based Platforms don't support Windows 8

    According to Intel release data, Cedar Trail - Intel Atom Processor N2000 & D2000 Series Based Platforms don't support Windows 8 due to no driver release. Please refer to page.9 in attachment

    ISG CedarTrail Dashboard - WW44 2012 - Final.pdf