ETX-LN Rev A1.1
ETX-LN Rev A1.1
ETX-LN Rev A1.1
ETX-LN Rev A1.1
ETX-LN Rev A1.1, ETX CPU Module with Onboard Intel® Atom™ D525/N455 Processor
CompareOverview
Phase Out Notice
Last Buy Date: 12/31/2017
Phase-out Reason(s): Due to the Intel PCH announcement of ICH8M which used on these products, we regret to inform you that these product series are going to EOL
Recommended Replacement Product(s): ETX-A55E
Based on the ETX form factor, the ETX-LN Rev. A11 module continues AAEON's commitment to providing new generations of technology to embedded customers who have existing modular designs. The ETX-LN Rev. A11 provides increased performance in a smaller power envelope and extends the longevity of existing ETX based designs.
The ETX-LN Rev. A11 has an onboard Intel® Atom™ Processor and the ICH8M I/O Controller Hub. Up to 4GB DDR3 system memory is supported by one 204-pin SODIMM socket. It also offers one 10/100Base-TX Ethernet for network connectivity. I/O demands are well met by 4 USB 2.0 ports, two RS-232 ports and parallel port. For storage requirement, there are two SATA 3.0 Gb/s ports. Additionally, the ETX-LN Rev. A11 offers both LVDS and analog video output in simultaneous and dual display modes.
Applications
- Test and Measurement
- Gaming & Entertainment
- Industrial Automation
- Military & Government
- Security
Features
- Onboard Intel® Atom™ D525/N455 Processor
- Intel® ICH8M
- SODIMM DDR3 667/800 Memory, Max. 4 GB
- 10/100Base-TX Ethernet
- CRT, 24-bit Single-channel LVDS LCD
- High Definition Audio Interface
- SATA 3.0Gb/s x 2, PATA x 1
- USB2.0 x 4, COM x 2
- +5V Only Operation
Specifications [ETX-LN REV A1.1]
| system | |
| Form Factor | ETX |
| CPU | Onboard IntelR Atom? D525/N455 |
| CPU Frequency | Up to 1.8 GHz/ FSB |
| Chipset | ICH8M |
| Memory Type | DDR3 667/800, SODIMM x 1 |
| Max. Memory Capacity | N455 667/2G, D525 800/4G |
| BIOS | AMI AMI BIOS, 4MB |
| Wake on LAN | Yes |
| Watchdog Timer | 255 Levels |
| Power Requirement | +5V |
| Power Supply Type | AT/ ATX |
| Power Consumption (Typical) | IntelR Atom D525 1.8 GHz, DDR3 1066 4 GB, 3.42A@+5V |
| Dimension (L x W) | 4.5” x 3.74” (114mm x 95mm) |
| Operating Temperature | 32°F ~ 140°F (0°C ~ 60°C) |
| Storage Temperature | -40°F ~ 176°F (-40°C ~ 80°C) |
| Operating Humidity | 0% ~ 90% relative humidity, non-condensing |
| MTBF (hours) | 100,000 |
| Certification | CE/FCC |
| display | |
| VGA/LCD Controller | Intel D525/N455/D425 integrated |
| Video Output | CRT, LVDS LCD |
| i/o | |
| Ethernet | Realtek RTL8105E, 10/100Base-TX |
| Audio | Realtek ALC662 |
| USB Port | USB2.0 x 4 |
| Serial Port | COM 1/2 |
| Parallel Port | SPP/EPP/ECP x 1 |
| HDD Interface | PATA x 1, SATA 2 x 2 |
| FDD Interface | — |
| Expansion Slot | PCI ISA I2C x 1 |
Ordering Information [ETX-LN REV A1.1]
| Part Number | ETX-LN-A11 | ETX-LN-A11-01 |
|---|---|---|
| cpu | Intel® Atom™ N455/1.66 GHz | Intel® Atom™ D525/1.8 GHz |
| memory | DDR3 SODIMM x 1 up to 2 GB | DDR3 SODIMM x 1 up to 4 GB |
| display | CRT, LVDS | CRT, LVDS |
| lvds | 24b, 1CH | 24b, 1CH |
| storage | SATA2 x 2 PATA x 1 | SATA2 x 2 PATA x 1 |
| lan | FE x 1 | FE x 1 |
| usb2.0 | 4 | 4 |
| kb/ms | 1 | 1 |
| uart | 2 | 2 |
| lpt | 1 | 1 |
| expansion slot | 8-bit/16-bit/ISA 32-bit PCI x 4 | 8-bit/16-bit/ISA 32-bit PCI x 4 |
| power | 5V | 5V |
| temp. | 0°C ~ 60°C | 0°C ~ 60°C |
Downloads [ETX-LN Rev A1.1]
- Datasheet
- Manual
Optional Accessories
| TF-ECB-902M-A10 | ETX Carrier Board, LAN, Audio, 2COM, USB2.0, PCI, ISA, AT/ATX, Rev. A1.0 (For ETX-LN, ETX-945GSE, ETX-701) |
| TF-PER-A101 | CPU Cooler, For ETX-LN, Onboard CPU |
| TF-PER-A102 | Passive Heatsink, For ETX-LN, Onboard CPU |
| TF-PER-A103 | Heat Spreader Kit, For ETX-LN, Onboard CPU |
FAQ [ETX-LN Rev A1.1]
- Why can single side RAM not be used on the products of Intel Atom™ Processor N400 & N500, D400 and D500 series
Per Intel Spec, Intel® Atom™ Processor N400 & N500, D400 and D500 series only support double-sided DDR3 memory.