ECB-916M Rev. B1.1 ECB-916M Rev. B1.1

    ECB-916M Rev. B1.1

    ECB-916M Rev.B11, COM Express Carrier Board for PICMG COM.0 R2.0 Type 2



    The ECB-916M Rev.B11 is a microATX form factor board supporting Type 1 and Type 2 COM Express Modules. AAEON's standard carrier boards can be used in their default configuration or as a starting point for a custom carrier design reducing the cost and time of development. Common uses of a standard carrier are proof-of-concept and software validation which gives any project a jump start to improve time to market.

    The ECB-916M Rev.B11 offers four serial ports, one parallel port, four USB ports, PS2 keyboard/mouse, and 8-bit programmable digital I/O. To take full advantage of today's high speed interfaces, the ECB-916M includes PCI-Express〔x16〕, PCI-Express〔x1〕, ExpressCard, Mini Card, standard PCI, as well as a Mini PCI. Storage needs are met with one PATA channel, four SATA connectors, one Floppy Disk Drive connector, and a CompactFlash Type II slot.

    A truly full featured and versatile validation platform, the ECB-916M Rev.B11 supports both AT and ATX power input. With 7.1 channel audio and VGA/ LVDS/ TV-out display interfaces the ECB-916M Rev.B11 delivers a rich multimedia experience, making it the perfect platform for any market.


    • Evaluation board


    • Supports COM Express Module Rev. 2.0 Pin-out Type 2
    • Supports Gigabit Ethernet, RJ-45 x 2
    • VGA/ DVI-D Connector
    • 7.1 Channel Audio
    • PATA Connector x 1, SATA Port x 3 (4), CompactFlash™ Type 2 Slot x 1
    • USB Port x 5, COM Port x 2
    • PCI-Express [x16] Slot x 1, PCI-Express [x1] Slot x 1, PCI Slot x 1
    • Express Card Slot x 1, Mini-PCI Slot x 1, Mini-Card Slot x 1
    • AT/ ATX Power Input
    • LPC Connector x 1, microATX Form Factor

    Specifications [ECB-916M REV. B1.1]

    Form FactorMicro-ATX
    COM Express Connectorx2
    I/O ChipsetWinbond W83627DHG
    Front Panel Control10-pin (5x2) header
    EthernetIntel® 82573L, 10/100/1000Base-TX, RJ-45 x 1
    10/100 Base-TX or 10/100/1000Base-TX, RJ-45 x 1 (From CPU module)
    Expansion InterfacePCI-Express [x1] slot x 1 ( additional 2 for test only) PCI-Express [x16] slot x 1
    ==> Add a 3-pin header for SDVO enabled or disabled PCI slot x 1
    Mini-PCI slot x 1 Mini-Card slot x 1 Express Card slot x 1
    Power Supply TypeAT/ATX
    CMOS BatteryRTC battery socket x 1
    BIOSSPI x 1
    Firmware Hub x 1 (with DIP Switch for BIOS Selection)
    Board Size9.6” x 9.6”(243.84mm x 243.84mm)
    Gross Weight1.32 lb (0.6 kg)
    Operating Temperature32˚F ~ 140˚F (0˚C ~ 60˚C)
    Storage Temperature-40˚F ~ 176˚F (-40˚C ~ 80˚C)
    Operating Humidity0% ~ 90% relative humidity, non-condensing
    MTBF (hours)77,000
    DVI/CRTDVI 29-pin + DB 15-pin stack-type connector
    LVDS30-pin (15 x 2) Dual-Channel LVDS connector x 1
    SDVO40pin (20 x 2) SDVO connector x 1
    Storage40-pin PATA connectorx1 SATA 3.0 Gb/s x 3
    CompactFlash™ Type 2 slot x 1
    Serial PortRS-232 Port x 1
    RS-232/422/485 Port x 1
    USBType-A connector x 4
    PS/2 Portx 1
    Digital I/OSupports 8-bit (Programmable)
    AudioAudio jack x 6, Supports 7.1 channel audio Audio Codec: Realtek ALC888
    Buzzer x 1
    Switch/ButtonPower button x 1 Reset button x 1
    Debug LED

    Ordering Information [ECB-916M REV. B1.1]

    Part NumberTF-ECB-916M-B11-01
    description COM Express Carrier Board, Micro-ATX, Dual LAN, PCI-Express, W/ Type1 Convert Board, AT/ATX, Rev. B1.1

    Downloads [ECB-916M Rev. B1.1]

    • Datasheet
    • Manual

    Packing List

    • 9681916M00 Cable Kit
    • 1701400453 IDE Cable x 1
    • 1709070500 SATA Cable x 1
    • 1702150150 SATA Power Cable x 1
    • 1701100207 COM Port Cable x 1
    • S1DD308042 Copper Stud x 1
    • S1DC002510 Nut x 1
    • ECB-916M Rev. B11
    // ********** Jan 2020 LinkedIn Tracking ********** //