FWS-7811 FWS-7811 FWS-7811 FWS-7811 FWS-7811 FWS-7811 FWS-7811 Rear View FWS-7811 Rear View FWS-7811 FWS-7811 FWS-7811 FWS-7811

    FWS-7811

    Intel® C226 1U Rackmount 8 LANs Network Appliance with 275W Redundant Power Supply Support

    Compare

    Overview

    Featuring Intel® 4th Gen Core™ / Xeon® Series Processor with the Intel® C226 Chipset, the FWS-7811 is a 1U Network Appliance that supports eight LAN ports (optional LAN bypass function up to 2 pairs), four 240-pin ECC DDR3(L) 1333/1600 MHz DIMM memory of up to 32GB, one optional Network Interface Module (NIM) slot, two USB3.0 ports, ,one RJ-45 for console, and two expansion slots.

    Applications

    • Unified Threat Management (UTM)
    • Virtual Private Network (VPN)
    • Content Management (CM)
    • Load Balancing
    • Intrusion Detection System (IDS)
    • Intrusion Prevention System (IPS)
    • Firewall

    Features

    • 1U Rackmount Network Appliance
    • LGA1150 4th Generation, Intel® Core™/Xeon Processor
    • 240-pin ECC/non-ECC DDR3(L) 1333/1600 UDIMM x 4 Up to 32 GB
    • Intel® i211AT 10/100/1000Base-TX Ethernet x 8 (Optional up to 2 Pair LAN Bypass Function)
    • Up to 16 Ports and 6 Pairs Bypass with NIM Series
    • Up to 2.5” SATA HDD x 5 or 2.5” SATA HDD x 3 + 3.5” SATA HDD x 1
    • LCM with Keypad x 1
    • RJ-45 for Console x 1, USB3.0 x 2
    • 275W Redundant AC Type Power Input Requirement
    • VGA Header x 1 (Optional VGA Cable)

    Specifications [FWS-7811]

    platform
    Form Factor1U Rackmount Network Platform
    ProcessorIntel® LGA1150 4th Gen Core™/ Xeon Processor
    ChipsetIntel® C226
    System MemoryDDR3 1333/1600 UDIMM/ECC
    Up to 32GB
    240-pin DIMM x 4
    network
    EthernetIntel® i211, Gigabit Ethernet x 8 + NIM
    Bypass2 ~ 4 (Depends on NIM)
    NIM Slot1
    display
    Graphics ControllerIntel® HD graphics integrated
    ConnectorVGA cable (Optional)
    storage
    HDDInternal 2.5” SATA HDD x 2 or 3.5” SATA HDD x 1 (Optional)
    CF/CFast/mSATACF socket x 1
    expansion/internal interface
    PCIe SlotPCIe [x8] slot x 1 (Optional)
    Mini-Card
    IPMI
    KB MousePin-header
    USBUSB 2.0 x 2 Box Header (2.0mm) (optional)
    miscellaneous
    RTCInternal RTC
    Watchdog Timer1~255 steps by software programmable
    Software ButtonGPIO Programmable push button x 1
    TPM
    GPIO
    Fan2
    MTBF (hours)97000
    ColorBlack
    Physical & Environmental SPEC
    Power Requirement275W Redundant PSU
    Operating Temperature32°F ~ 104°F (0°C ~ 40°C)
    Storage Temperature-4°F ~ 140°F (-20°C ~ 60°C)
    Operating Humidity10 ~ 80%
    Storage Humidity10 ~ 80% @ 40°C, non-condensing
    Vibration0.5 Grms/ 5 ~ 500Hz/ operation (3.5” H.D.D)
    1.5 Grms/ 5 ~ 500Hz/ no operation
    Shock10G peak acceleration (11 m sec. duration), operation
    20G peak acceleration (11 m sec. duration), non-operation
    Dimension (W x D x H)16.93” x 18.7” x 1.73”
    (430mm x 475mm x 44mm)
    i/o interface
    Front PanelPower LED x 1
    Status LED x 1
    HDD Active LED x 1
    LAN ports Link/Active LED x 8
    Bypass LED (Default 2 LEDs)
    USB 3.0 Ports x 2
    RJ-45 Console x 1
    Parallel LCM display and 4 keypad x 1
    Software Programmable Switch x 1
    Rear PanelAC Power Input x 2
    Power Switch x 1
    VGA port (Optional)
    Rear Expansion Slot x 2 (Optional)

    Ordering Information [FWS-7811]

    Part NumberFWS-7811W8-R27-A10-000
    cpu Intel® 4th Generation Core™/ Xeon Processors
    memory DDR3 ECC/UDIMM (Up to 32GB)
    storage 2.5" HDD Bay x 2
    display VGA
    (Optional)
    lan GbE x 8
    usb USB 3.0 x 2
    console RJ-45 x 1
    bypass 2
    *nim slot 1
    **expansion slot PCIe [x8] slot x 1 (Optional)
    or PCIe [x8] slot x 2, cannot use w/ NIM (Optional)
    mounting 1U
    Rackmount
    power Redundant ATX
    note *Note 1: Need to configure riser card and module
    **Note 2: Need to configure riser card

    Downloads [FWS-7811]

    • Datasheet
    • BIOS
    • Driver
    • Manual

    Packing List

    • Gift Box (Including Console Cable, Ear Brackets)
    • FWS-7811

    Optional Accessories

    M02666600 Slide x 2, for Rackmount Usage
    1702031803 Power Cord, 3P-250V/10A, 180D, 1.8M, VDE, YP22/ YP12
    1702031802 Power Cord, 3P-250V/10A, 180D, 1.8M, USA, YP22/ YP12
    170203180E Power Cord, 3P-25V/7A, 180D, 1.8M, PSE, YP12/YP12
    9761781105 VGA Cable for FWS-7811
    PER-T281-A10-01 PER-T281, Riser Card for NIM
    PER-T355-A10-01 PER NIC Riser, with NIC cover frame, PCIe, Rev. A1.0, for FWS-781x/73xx
    PER-C35L-A10-00 Fiber Module Intel® 82599,10 GbE x 2, Rev. A1.0
    PER-C36L-A10-01 Fiber Module Intel® i210.1 GbE x 2, Rev. A1.0
    PER-C36L-A10-02 PCI-Express Gigabit Ethernet Module w/ Intel® i210 Controller, 4 Fiber GbE
    PER-C38L-A10-02 LAN Module Intel® 82580EB 1GbE x 8, 4 pairs Bypass, Rev. A1.0
    PER-C39L-A10-01 LAN Module Intel® 82580EB 1GbE x 8, Rev. A1.0
    PER-C38L-A10-02 LAN Module Intel® 82580EB 1GbE x 8, 4 pairs Bypass, Rev. A1.0
    PER-C40L-A10-01 LAN Module Intel® 82580EB 1GbE x 4, Rev. A1.0
    PER-C41L-A10-01 LAN Module Intel® 82580EB 1GbE x 4, 2 pairs Bypass, Rev. A1.0
    NIM-S13D-A10-G40-0003 LAN Module, Intel® 82580EB, 4 x 1GbE SFP, FWS- 7810/7811, Rev. A.1.0
    NIM-S13E-A10-G82-0003 LAN Module, Intel® 82580EB, 4 x 1GSFP, 2 Bypass, FWS-7810/7811, REV. A1.0

    FAQ [FWS-7811]

    Do FWS-78xx series product only support "Unbuffered ECC" RAM only (did not support "Registered ECC" RAM)?

    FWS-78xx series products only support "Unbuffered ECC" RAM, please ask customer use Un-buffered ECC RAM not Registered ECC RAM.