ECB-920A-A11
COM Express Evaluation Carrier Board (Type 6/Type 10)
Compare
Overview
The ECB-920A is a ATX form factor board supporting Type 6 and Type 10 COM Express Modules. AAEON's standard carrier boards can be used in their default configuration or as a starting point for a custom carrier design reducing the cost and time of development. Common uses of a standard carrier are proof-of-concept and software validation which gives any project a jump start to improve time to market.ECB-920A offers one 2.5 GbE port, four SATA ports, eight USB 2.0 ports and four USB3.0 ports for expedited integration.
Applications
Features
- ATX Form Factor (305mm × 244mm)
- Supports COM Express Rev3.0, Pin out Type 6/Type 10
- PCIe [x4] x 2, PCIe [x16] x 1
- VGA Port x 1, LVDS, eDP, Display Port x 3
- USB 2.0 x 4, USB 3.2/2.0 x 4
- SATA III x 4
- RJ-45 GbE x 1, Supports up to 2.5GbE
- High Definition Audio
- LPC/eSPI Slot, GPIO/SDIO, SMBus x 1, I2C x 1
- COM Port x 2 (2-Wire UART Tx/Rx), GPIO 8-bit
Specifications [ECB-920A-A11]
| system |
| Form Factor | ATX |
| COM Express Connector | x 2 (Row A,B & Row C,D) |
| I/O Chipset | — |
| Front Panel Control | 10-pin Header (5x2) |
| Ethernet | 10/100/1000/2500 Base-TX, RJ45 x 1 (From CPU Module) |
| Expansion Interface | PCIe [x4] x 2
PCIe [x16] x 1 |
| Power Supply Type | ATX |
| CMOS Battery | RTC battery socket x 1 |
| BIOS | — |
| Board Size | 12" x 9.6"(304mm x 244mm) |
| Gross Weight | 1.32 lb (0.6 kg) |
| Operating Temperature | 32°F ~ 140°F (0°C ~ 60°C) |
| Storage Temperature | -40°F ~ 185°F (-40°C ~ 85°C) |
| Operating Humidity | 0% ~ 90% relative humidity, non-condensing |
| display |
| DVT/CRT/VGA | - |
| LVDS/eDP | - |
| DDI | Display Port x 3 (Dual x1, Single x 1) |
| i/o |
| Storage | SATA III x 4 |
| Serial Port | COM Port x 2 (2-Wire UART Tx/Rx) |
| USB | USB 2.0 x 4 (Type-A), USB 3.2/2.0 x 4 (Type-A) |
| Audio | Audio Jack, supports Line-in, Line-out, Microphone |
| GPIO | 8-bit Programmable |
| Switch/Button | Power Button x 1 / Reset Button x 1 |
| Debug LED | 80 PORT |
| I2C | 1 |
| Expansion | LPC, SMBus, eSPI, CAN Bus, 4 pin fan connector, Micro SD Card Slot x 1 |
Ordering Information [ECB-920A-A11]
| Part Number | ECB-920A-A11-0001 |
|---|
| description | COMe Type 6/10.Carrier Board.ATX.2.5GbE.8USB.2COM.4SATA.PCIe.AT/ATX.Rev. A1.1 |
Packing List
- PER-T603 (COM Express Type Converter Board) x 1
- PER-T604 (PCI-E[x/4 to PCI-E[x1] x 4 Card) x 1
- Cable Kit x1 (Including SATA Cable x 2, COM Port Cable x 2)
- ECB-920A-A11 x 1
Optional Accessories
| ECB-920A-A11-BRKT01
| ECB-920A-A11.IO Bracket |
| 170X000324
| 5V Power cable 1x4P to ATX 2x2P.200mm |
Type 6/10 Function Table
| COM Type | Type 6 | Type 10 |
| PCIe [x16] | 1 | — |
| PCIe [x4] | 1 (Lane 0 – Lane 3) | 1 (Lane 0 – Lane 3) |
| PCIe [x1] | 1 (Lane 4 – Lane 7) | — |
| VGA | 1 | — |
| DDI | 3 (DDI1 – DDI3) | 1 |
| LVDS | 1 | 1 |
| LAN | 1 | 1 |
| SATA III | 4 (Lane 0 – Lane 3) | 2 (Lane 0 – Lane 1) |
| Serial Port (Tx/Rx) | | |
| USB 3.2 | 4 (Lane 0 – Lane 3) | 2 (Lane 0 – Lane 1) |
| USB 2.0 | 8 (Lane 0 – Lane 7) | 8 (Lane 0 – Lane 7) |
| GPIO/SDIO | 1 (GPIO 8 bits) | 1 (GPIO 8 bits) |
ECB-920A-A11
ECB-920A-A11
ECB-920A-A11