New
    AIOT-ILND01 AIOT-ILND01 AIOT-ILND01 AIOT-ILND01 AIOT-ILND01 AIOT-ILND01 AIOT-ILND01 AIOT-ILND01 COMPUTEX d&i Awards 2019 COMPUTEX d&i Awards 2019

    AIOT-ILND01

    LoRa Long Range Radio Node Board

    Compare

    Overview

    The AIOT-ILND01 LoRa Node is available as a board or with an enclosure. It can be powered by two 14500 Lithium-ion batteries, or through its micro USB 2.0 port. It features built-in temperature and humidity sensors, as well as a 3-axis accelerometer, and is designed to also connect with a wide variety of sensors and inputs. With three Grove connectors, it is easy to connect to a computer to configure. Our SDK enables developers to program the AIOT-ILND01 to suit the functions of their applications. AAEON also provides manufacturer and ODM services to customize the unit itself.

    Features

    • LORA stack & STM32 application architecture
    • Support 868/916 MHz
    • Build in Temp/humidity sensor, 3-axis accelerometer
    • 3 x GROVE Connectors for UART & I2C
    • Supports with +5V or 2 x 14500 Lithium-ion battery

    Specifications [AIOT-ILND01]

    system
    Form Factor3.35" x 2.56" (85 mm x 65 mm)
    MCUST STM32L Semtech SX1276
    I/OGROVE connectors x 3
    - x UART1 (RS-232/RS-485) x 1
    - x UART2 (TX/RX) x 1
    - x I2C x 1
    Temperature & humidity sensor x 1
    3-axis Accelerometer (2G/4G/8G/16G) x 1
    Micro USB2.0 type B for power supply x 1
    JTAG-debug port x 1
    Battery connector x 2 for 14500 Lithium-ion battery x 2
    OthersLED (GPIO control) x 4
    3 buttons
    - boot select x 1
    - User defined x 2
    - Reset button x 1
    SMA antenna connector x 1
    IPEX antenna connector (Optional) x 1
    Power Input+5V (via Micro USB)
    14500 Lithium-ion battery for external power x 2
    Operating Temperature32 °F ~ 140 °F (0 °C ~ 60 °C)
    Operating Humidity0% ~ 90% relative humidity, non-condensing
    CertificationCE

    Ordering Information [AIOT-ILND01]

    Part NumberAIOT-ILND01-A10-MURABZ-EU
    mcu ST STM32L Semtech SX1276
    i/o 3 x GROVE connectors
    - 1 x UART1 (RS-232/422/485)
    - 1 x UART2( T X /R X )
    - 1 x I2C
    1 x Temperature & humidity sensor
    1 x 3-axes Accelerometer (2G/4G/8G/16G) 1 x micro USB2.0 type B with power
    1 x JTAG-debug port
    2 x battery connector for 2 x A A
    wifi/ bt
    lora Frequency band 868MHz
    mounting
    power +5V (USB)
    2 x A A battery for external powe
    operation temperature 32°F ~ 140°F (0°C ~ 60°C)
    others 4 x LED (GPIO control) 3 buttons
    - 1 x boot select
    - 2 x User defined 1 x Reset button
    1 x SMA antenna hole 1 x IPEX antenna hole

    Downloads [AIOT-ILND01]

    • Datasheet
    • Manual

    Packing List

    • AIOT-ILND01 x 1
    • Antenna x 1