New
    NanoCOM-APL NanoCOM-APL NanoCOM-APL NanoCOM-APL NanoCOM-APL NanoCOM-APL

    NanoCOM-APL

    COM Express Type 10 Module with Intel® Atom™ SoC

    Compare

    Overview

    The NanoCOM-APL is built around a 6th Generation Intel® Atom™, Celeron®, or Pentium® processor and features onboard LPDDR4 memory with a capacity of up to 8GB. The 7W module’s low power-consumption architecture means it can be used at the heart of hand-held, battery-powered devices and fully enclosed IP67 applications.

    Combined with an FPGA controller and an AI chip, the NanoCOM-APL is being used as the centerpiece of advanced machine vision systems that scan products to create 3D images that can be checked for faults. Because of its size and industrial operating temperature range, these systems can be used on a production line or even on a robotic arm.

    The module also features 1GbE LAN connections, optional onboard eMMC storage of up to 64Gb, a PCIe x4 expansion slot, an LVDS, DDI, or eDP connections, and support for up to eight USB3.0 and two USB2.0 ports.

    Features

    • Intel® Atom™ E3900 Processor SoC
    • Onboard Memory LPDDR4 4GB
    • Supports eDP/LVDS, DDI Display
    • SATA x 2, eMMC 5.0 (Optional, up to 64 GB)
    • USB 2.0 x 8 + USB 3.0 x 2
    • PCI-Express [x1] x 3 or PCIe [x4] x 1
    • PICMG COM.0 R3.0. Type 10. 84mm x 55mm

    Specifications [NANOCOM-APL]

    system
    Form FactorCOM Express, Mini size, Pin-out Type 10
    CPUOnboard 6th Generation Intel® Atom™/Celeron®/Pentium® SoC
    CPU FrequencyE39xx series, N4xxx series
    ChipsetIntel® Atom™/Celeron® Processor SoC
    Memory TypeOnboard LPDDR4
    Max. Memory Capacity8GB LPDDR4 Onboard
    BIOSSPI type
    Wake on LANYes
    Watchdog Timer255 Levels
    Power RequirementStandard : +12V, AT/ATX (Optional: +5V, AT/ATX)
    Power Supply TypeAT/ATX
    Power Consumption (Typical)
    Dimension (L x W)3.31” x 2.17” (84mm x 55mm)
    Operating Temperature32 °F ~ 140 °F (0 °C ~ 60 °C)
    -40 °F ~ 185 °F (-40 °C ~ 80 °C)
    Storage Temperature-40°F ~ 176°F (-40°C ~ 80°C)
    Operating Humidity0% ~ 90% relative humidity, non-condensing
    MTBF (hours)80,000
    CertificationCE/FCC
    display
    Display ControllerIntel® HD Graphic
    Video OutputLVDS LCD/eDP, DDI x 1
    LVDS Interface
    i/o
    EthernetIntel® I210IT
    AudioHigh Definition Audio Interface
    USB SupportUSB 2.0 x 8, USB 3.0 x 2
    Serial PortTX/RX x 2
    HDD InterfaceSATA 2 x 2
    Onboard StorageOptional onboard eMMC
    Expansion SlotPCI Express [x1] x 8-lane, max. 3 device LPC Bus x 1
    SMbus x 1
    GPIOGPIO 8-bit
    TPM

    Ordering Information [NANOCOM-APL]

    Part NumberNANOCOM-APL-A10-0001NANOCOM-APL-A10-0002NANOCOM-APL-A10-0003
    com express type 10 (COM.0 Rev 3.0) 10 (COM.0 Rev 3.0) 10 (COM.0 Rev 3.0)
    cpu Intel Pentium N4200 Intel Celeron N3350 Intel Atom E3950
    memory 4GB DDR4 2GB DDR4 4GB DDR4
    display LVDS, DDI x 1 LVDS, DDI x 1 LVDS, DDI x 1
    lvds 18/24-bit 1-channel (Optional: eDP) 18/24-bit 1-channel (Optional: eDP) 18/24-bit 1-channel (Optional: eDP)
    storage SATA x 2 SATA x 2 SATA x 2
    32 GB eMMC
    lan GbE x 1 GbE x 1 GbE x 1
    usb USB 3.0 x 2
    USB 2.0 x 8
    USB 3.0 x 2
    USB 2.0 x 8
    USB 3.0 x 2
    USB 2.0 x 8
    uart 2 (Tx/Rx) 2 (Tx/Rx) 2 (Tx/Rx)
    expansion slot PCI-E[x1] x3 PCI-E[x1] x3 PCI-E[x1] x3
    power 12V 12V 12V
    temp 0°C~60°C 0°C~60°C 0°C~60°C
    others I2C, SMBus,
    8b-GPIO/(SDIO)
    I2C, SMBus,
    8b-GPIO/(SDIO)
    I2C, SMBus,
    8b-GPIO/(SDIO)

    Downloads [NanoCOM-APL]

    • Datasheet
    • BIOS
    • Driver
    • Manual

    Packing List

    • Screws
    • Product DVD
    • NanoCOM-APL

    Optional Accessories

    NanoCOM-APL-E-HSP01 Heat Spreader 84 x 55 x 11 mm, Black, NanoCOM-APL For E39xx CPU only
    NanoCOM-APL-N-HSP01 Heat Spreader 84 x 55 x 11 mm, Black, NanoCOM-APL For Nxxx CPU only
    NanoCOM-FAN01 CPU Cooler, for NanoCOM, to be used with Heat Spreader
    ECB-920A-A10-0001 COM Type 1/6/10, Carrier Board, ATX, GbE, 8USB, 2COM, 4SATA, PCIe, AT/ATX, Legacy Free, Rev. A1.0