GENE-APL6, Apollo Lake, 3.5” SubCompact Board with Intel® Pen GENE-APL6, Apollo Lake, 3.5” SubCompact Board with Intel® Pen GENE-APL6 GENE-APL6 GENE-APL6 GENE-APL6 GENE-APL6 GENE-APL6


    3.5” SubCompact Board with Intel® Pentium® N4200/ Celeron® N3350 Processor SoC



    Equipped with an Intel® Pentium® N4200 or Celeron® N3350 processor and DDR3L memory, the fanless GENE-APL6 features a solder-up design, which allows for the easy implementation of a heat spreader to channel heat from the CPU out through the chassis. Additional wide temperature support controls are available on request.
    A wide DC input range of 9V to 36V allows the board to overcome fluctuations in power supply and continue running in the unstable environments of factory automation and in-vehicle systems. The GENE-APL6 has been further ruggedized with anti-vibration measures including onboard eMMC storage of up to 128G.

    AAEON is a customer-focused company, and it responded to requests for dual LVDS support when designing the GENE-APL6. The low power consumption technology with high noise immunity is ideal for rugged applications, and an HDMI port can be installed as a custom option. Four USB ports, four COM ports, and Mini Card and mSATA expansion slots, give the board the flexibility to match its strength.

    By removing points of weakness, such as storage through expansion slots only, and by adding the features end users want to see, we’ve made the GENE-APL6 the strongest, most complete factory automation and in-vehicle motherboard on the market


    • Intel® Pentium® N4200/ Celeron® N3350 Processor SoC
    • DDR3L 1866 MHz SODIMM x 1, up to 8 GB
    • VGA/LVDS/LVDS2 (HDMI Co-layout with LVDS2 Optional)
    • 2 CH Audio, SATA 6.0 Gb/s x 1, eMMC up to 64G (Optional)
    • Supports 8-bit Digital I/O, USB 2.0 x 2, USB 3.2 Gen 1 x 2, COM x 4
    • Mini Card x 1 (Full-size), mSATA x 1 (Half-size)
    • 9~36V wide DC input or +12V only (Optional), AT/ATX Mode
    • Supports TPM (Optional)
    • 4/5/8-wire Resistive Touch Screen Controller (Optional)

    Specifications [GENE-APL6]

    Form Factor3.5" SubCompact Board
    CPUIntel® Pentium® N4200/ Celeron® N3350 Processor SoC
    CPU Frequencyup to 2.5GHz
    ChipsetIntel® Pentium® N4200/ Celeron® N3350 Processor SoC
    Memory TypeDDR3L 1866MHz, SODIMM x1
    Max. Memory CapacityUp to 8GB
    Wake on LANYes
    Watchdog Timer255 Levels
    Power Requirement+9~36V or +12V
    Power Supply TypeAT/ ATX
    Power Consumption (Typical)Intel® N4200, DDR3L 1600MHz 8G,
    1.55A@ +12V
    Dimension (L x W)5.75" x 4" (146mm x 101.7mm)
    Operating Temperature32°F ~ 140°F (0°C ~ 60°C)
    Storage Temperature-40°F ~ 176°F (-40°C ~ 81°C)
    Operating Humidity0% ~ 90% relative humidity, non-condensing
    MTBF (hours)128,793
    VGA/LCD ControllerIntel® Pentium® N4200/ Celeron® N3350 Processor SoC
    Video OutputLVDS, LVDS2, VGA (HDMI is optional, co-layout with LVDS2)
    Backlight inverter supplyYes
    EthernetIntel® i210/I211, 10/100/1000Base-TX, RJ-45 x 2
    AudioHigh Definition Audio Interface
    USB PortUSB 3.2 Gen 1 x 2
    USB 2.0 x 2
    Serial PortRS-232 x 2 , RS-232/422/485 x 2
    Parallel PortSPP/EPP/ECP x 1 (Option, Shared with DIO)
    HDD InterfaceSATA 3.0 x 1
    +5V SATA power connector x 1
    FDD Interface
    SSDeMMC 16G/32G/64G (optional)
    Expansion SlotMini Card x 1 (Full-size) mSATA x 1 (Half-size)
    SIMx 1 (uSIM)
    TPMTPM 2.0 x 1 (option)
    Touchx 1 (option)

    Ordering Information [GENE-APL6]

    Part NumberGENE-APL6-A10-F001GENE-APL6-A10-F002
    cpu N3350 N3350
    fan/fanless HSP HSP
    display VGA, LVDS, LVDS2 VGA, LVDS, LVDS2
    lvds 24bit,2CH 24bit,2CH
    storage SATA x 1
    mSATA x 1
    SATA x 1
    eMMC 32G
    lan GbE x 2 GbE x 2
    usb USB 3.2 Gen1 x 2
    USB 2.0 x 2
    USB 3.2 Gen1 x 2
    USB 2.0 x 2
    rs-232 2 2
    rs-232/422/485 2 2
    expansion slot MiniCard x 1 (Full-size) MiniCard x 1 (Full-size)
    power 9~36V 9~36V
    power temp 9~36V 9~36V
    others DIO x 8 Touch Controller,
    SIM, TPM, DIO x 8

    Downloads [GENE-APL6]

    • Datasheet
    • BIOS
    • Driver
    • Manual

    Packing List

    • GENE-APL6 with Heat Spreader

    Optional Accessories

    Part Number Description QTY
    1700050207 (TF)USB CABLE.1*5P Pitch=1.25mm Housinh.20cm.for PFM-945C 2
    1701090150 (TF)Flat Cable.D-Sub 9(M).9P Housing.9P 1.25mm pitch Housing.15cm 3
    1709100254 (TF)PHONE JACK Cable.3P AUDIO JACK.1*10P 1.25mm HOUSING(F).25cm 1
    1709070500 (TF)SATA CABLE.7P Pitch 1.27mm.50cm 1
    1702150155 (TF)Power Cable.15P SATA(F).2P 2.0mm Housing(PH).15cm 1
    170220020B (TF)Power Cable.20P ATX(M).4P 5.08mm Housing(F).+3P 2.5mm Housing(XH).20cm 1
    GENE-APL6-HSK01 HeatSink.146X80X14mm.Silver.GENE-APL6.(used with heat spreader) 1
    1702002010 (TF)Power CABLE. 1*2P Pitch=5. 0mm Housing. 10cm. for PFM-945C. (12V only) 1