NITX-BD1 - Industrial Motherboards

End-of-Life Products
Industrial Motherboards
NANO-ITX Motherboards
Intel® 5th Gen processor Nano-ITX Board With 2 D

NITX-BD1 NITX-BD1 - Industrial Motherboards

SYSTEM

processor 5th Generation Intel® 14nm ULT i7-5650U/ i5-5350U/ i3-5010U
BGA CPU
15W TDP

Chipset Intergrated into SoC

Memory SODIMM x 2
max. 16GB
DDR3L 1600 MHz
Non-ECC
un-buffered memory

I/O Chipset NCT5538D

Ethernet Realtek 8111G Giga LAN 10/100/1000Mb LANs x 2
RJ-45 x 2

Audio Realtek® ALC887

TPM —

Expansion Slot M.2 slot (M-key) x 1
length: 60mm (mSATA colay LVDS)
auto detect
Mini-Card half size (USB+PCIe+mSATA) x 1
default USB+PCIe
MSATA BOM change

BIOS 128M bit Flash ROM
AMI BIOS

H/W Monitor Temperature Monitor on CPU/System
Voltage Monitor on Vcore/5V/3.3V/12V
Fan Monitor on Chassis

Watchdog Timer 1~255 steps by software program

Smart Fan Control Chassis Fan

Wake On LAN/ PXE Yes (WOL/PXE)

Power State S3, S4, S5

GRAPHICS

Graphics Chipset Integrated Graphics
LVDS via Chrontel CH7511
Support by add on M2 module

Graphics Multi Display DP1+DP2+LVDS
DP1+DP2
LVDS+DP1
LVDS+DP2

VGA —

DVI —

HDMI —

DisplayPort DP 1.2a (U): 3840 x 2160
(H): 4096 x 2304

LVDS 1920 x 1200

eDP —

Backlight Control Yes

ENVIRONMENTAL & POWER & ME

Battery Lithium battery

Power Requirement DC power jack x 1 (DC: 12V~19V
Wide rage: 12V-5%~ 19V+10%)

Operating Temperature 32°F ~ 131°F (0°C ~ 50°C)

Storage Temperature -40°F ~185°F (-40°C ~85°C)

Operating Humidity 20% ~ 90% RH
Non-condensing

Certification CE & FCC class A

Form Factor NANO ITX: 4.72” x 4.72” (120mm x 120mm)

Weight —

MTBF (hours) 434910

FRONT PANEL I/O PORTS

USB USB 3.0 port x 2, USB 2.0 port x 2
USB header support USB 2.0 port x 1 (p=2.00mm)

Audio I/O Audio jack x 2: Line-out (green)
Mic-in (pink)

Others On/Off Button x 1
Power LED + HD LED x 1

REAR PANEL I/O PORTS

USB USB 3.0 port x 2

Display I/O DP connector x 2

Audio I/O —

LAN I/O RJ-45 connector x 2

Serial Port —

PS/2 Port —

Others Reset Switch x 1
DC power jack x 1

INTERNAL I/O CONNECTORS

Storage SATA 6.0 Gb/s port x 1
M.2 slot for mSATA x 1 (optional)

USB USB header support USB 2.0 port x 1 (p=2.00mm)

Display I/O LVDS connector x 1
Support by add on M.2 module

Audio I/O —

Serial Port COM port header x 1
P=1.25mm (RS-232)

PS/2 Port —

Parallel Port —

DIO —

Fan Chassis Fan connector x 1 (3-pin, p=2.00mm)

Power SATA power connector x 1
Support by add on M.2 module
int. 2-pin reset switch x 1
Int. 2-pin power switch x 1

Others Mini-Card half size x 1 (USB+PCIe+mSATA
default USB+PCIe
mSATA BOM change)
LVDS inverter x 1
support by add on M.2 module

OS

OS support Windows® 7 32/64-bit
Windows® 8.1 32/64-bit
Windows® 10 64-bit
Linux
Fedora