GENE-WHU6 Manual

1. HdaVoltSelect from 1.8V to 3.3V 2. Update Fan Table request by PM and Thermal team 3. Display PTT Configuration 4. Change default to CPU temp 5. Enable fTPM

1. Update secure boot key 2. Correct BIOS ROBOT module 3. Support PTN3460 SSC/SWING item 4. Add SATA speed item 5. Set Detect Non-Compliance Device enable and modify BIOS setup string 6. Patch PECI function fail when resume from S3 7. Microcode update 8. Support IMS 9. Support console redirection 10.Support ALC888/ALC897 11.Update VBIOS 12.Set GPIO57 output low for F81439 mode0 13.Correct temp source string

1. Remove Patch SMF can't get max speed issue. 2. Remove Manual RPM Mode and Auto RPM Mode. 3. Modify F1TS and H1RS to match BFPI V0.4 design.

**First Version